"I purchased my GE top load washer & dryer online, through Home Depot, on August 25, 2020. I also went with their extended warranty through Asurion. \nDuring the first part of December 2024 the washing machine wasn't functioning\nproperly. I contacted Home Depot Protection Plan. About a week and a half later on December 16, 2024, a technician arrived and determined the unit needed a speed sensor, and ordered one. On January 2, 2025 the speed sensor was replaced. It didn't solve the issue. A motor & invertor board was ordered. On January 15, 2025 those parts were installed. Didn't help. The main board was installed. Still not working properly. A technician was due to come out on January 15, 2025, but received a call saying the wiring harness needed replaced. Again, on order. It is due to be installed February 6, 2025. It's going two months with no working machine. They won't replace the unit, even though a technician has been out here four times. I'm 76 years old and having to go to a laundromat. I can safely say this has been one of the worse experiences I've had to deal with."
The Home Depot
2.5
40
1680 Stringtown Rd, Grove City
OPEN · 06:00 - 21:00 · +1 614-539-4554
"We paid $99 for Threshold delivery. A third-party deliverer brought the delivery, but initially refused threshold service, since their paperwork didn't show it. I called Home Depot in front of them, and they changed their tune fast. Not sure if Home Depot is at fault or the delivery service, but my wife and I came away frustrated with this process. Improvements must be made!"
Ohio Power Tool
3.5
15
999 Goodale Blvd, Columbus
CLOSE · 07:00 - 17:00 · +1 614-481-2111
"Received confirmation of an order that I didn't make. Called Sam and he reversed it without any trouble."
The Home Depot
2
22
6035 Gender Rd, Canal Winchester
OPEN · 06:00 - 21:00 · +1 614-833-6700
"I was in the Gender Road Store and bought trim that I only needed 3 - 80" pieces but instead of making 2 cuts I made 1 in the middle getting 2 - 7 footers since they sell them by the foot. \n\nI grabbed another piece that someone had already cut 80" out of it and I've done it before and have always been charged for a 7 footer not 88"..... \n\nI let the long gray haired lady know and she said I'm always up here and that doesn't happen basically calling me a liar. \n\nI took the piece back to the saw and cut off the unnecessary 4". \n\nI brought it back up and was treated like I was trying to steel a 4" piece of wood. \n\nAs a contractor I've bought thousands of dollars of materials every month from Home Depot. \n\nI can't believe I was treated like a thief of a precut board that was already cut. \n\nI guess I wouldn't be as angry but in the past years I have literally watch people walk out with arms full of tools and they do nothing about it....\n\nTrust me if I had the time I would have taken all of them back and cut them to the 80" and only paid for 80" that I needed. \n\nWhen I came back up to the register I threw the 4" piece of wood in the trash and they literally got it out like they were going to sell it. \n\nI mainly shop at Grove city which in my opinion is a 5 star store. \n\nI have never been treated so poorly and especially treated like a thief over 4 inches of wood that was already cut to this size by another customer. I at least cut the 14' pieces in half to keep things simple. \n\nThis woman says she's been there for 20 years.... well I think it's time for her to go..."
Anyone know of a good Ryobi press technician. We are having problems with a 524GE and need a knowledgeable serviceman to look into it. We've tried Xpedx but have been getting the runaround for parts and service from them. My next thought would be to go to Ferrostaal but thought I would check out...
Can someone please assist me with my Windows 98 PC running inside the Ryobi 3404 DI press, coming up with an Error E-020B communication error, I have tested the 2 x ...
Re: Heidelberg SM 52 vs. Ryobi 525 GX Having run a variety of press old and new, The SM52 will give your a lot of versatility. our Configuration is a 6 Color perfector (4/2) with Aq Coater. Fast make ready for your short run stuff 1000 sheets or less. 15,000 sph production with non stop feeder and delivery For your longer runs. I believe the new machines come with the "Mechanic in the Box ...
Hi everyone, by the way nice community! My first time here. Right now i am workinf with Ryobi 3302 2000 (Ryobimatic) + poly plates from a DPM 2340. I have a lot of problems whit the water system, these problems has been check by 2 technicians. Trying to fix the metering roller, getting new...
Ryobi Ink Volume Setter (IVS) used to come boxed with the software CD-ROM and a number of printed instruction books (on right side of attached photo). Some of these books were also in PDF format on the CD-ROM, unfortunately not the Network Setup GUIDE.
Re: Is Ryobi 3304H a good 4 colour press? The 3304 is an excellent machine. If you install a Crestline water system you will have a DI Buster! I service 2 3304's and many 3302H's and the customers are like happy and satisfied. Both run poly plates and are up to color in 4 sheets. Register is excellent etc. Plus you will have no dull waterless ink look or DI Crack and fold issues. The original ...
AB Dick 9995 Dampening System AB Dick 9995 Dampening System We have a 9995 & are using the original Ryobimatic system. We were having problems about 2 years ago & our Presstek/AB Dick service tech wanted to swap out for Crestlines ($6500). After checking around, we found a Ryobi service tech who told us most of the problems with the Ryobimatic were usually simple adjustment problems. We had ...
Just finished installing a Ryobi 3302m with crestlines (altra) in my small shop, where I had previously been running a hamada one-color duplicator. There are a lot of things about this press that are alien to me, and these are the (probably dumb) questions I have that aren't addressed in the...
Ryobi is backwards on their thinking. They say a 3.5 mil stripe to the plate and a 3 mil stripe to the oscillator. Should be reverse I always did about 3 mil to the plate an about 3,5 to the oscillator. You dont want the plate driving the form roller. The roller train should be driving the form roller.
I'm having problems getting the registration to hold on a Ryobi 3302. I can get the press to register for about a 100 sheets or so but then the registration starts to bounce. We have had this press for about 4 months now, we bought it from our service tech, and since he is not a printer I got...
